JUSTIFICATION OF EFFICIENCY OF COMPLEX USE TECHNOGENIC DEPOSIT
- Authors
-
-
Naimova R. Sh.
Tashkent State Technical University
Author
-
- Keywords:
- Open-pit mining, mining, quarry, technogenic Deposit, dump, tailings, mining waste, hydraulic laying, mineral raw materials, overburden, pulp, phosphoplast, environment.
- Abstract
-
The article deals with the use of man-made deposits formed as a result of open mining and methods of storage of waste processing of mineral raw materials. Research and experience of the largest quarries on complex use of tailings of enrichment, dumps, waste of production in the form of overburden and processing of tailings of hydrometallurgical plants which are typical technogenic deposits and which can be considered as reserve sources of mineral raw materials are resulted. The results of researches on complex use and geotechnological support of formation and development of hydraulic laying of waste of wet enrichment of granular phosphorites of Kyzylkum phosphorite complex are covered in more detail. It is determined that the method of storage of waste in a mined-out quarry provides integrated processing of technogenic fields with minimum environmental pollution, and the regularities of particle deposition in hydraulic stacking the tailings storage facility allow us to conclude that the concentration of the enriched product in a particular layer of sediments allows to consider such tailing as anthropogenic deposits, development of which is possible in the future.
- Downloads
- Published
- 2025-12-31
- Issue
- Vol. 1 No. 2 (2025)
- Section
- Articles
- License
-

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- Alisha Verma, ADVANCED GEOPHYSICAL REMOTE SENSING TECHNIQUES FOR SUSTAINABLE MINERAL EXPLORATION , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 1 No. 1 (2025)
- Shaislamov Alisher Shabdurahmanovich, Boymatov Nurmuxammad Almardon o‘g‘li, IMPROVING ENERGY EFFICIENCY THROUGH MODERNIZATION OF THERMAL TECHNOLOGICAL EQUIPMENT AT THE “KVARTS” GLASS PLANT , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 1 (2026)
- Nurbek Nuriddin Choriev, PhD Saida Abdujalilovna Abdukarimova, PhD Latofat Kobil qizi Makhkamova, PRODUCTION OF APOLAR REAGENTS FROM LOW-MOLECULAR POLYMER WASTE , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 1 (2026)
- Dr. Lukas Reinhardt, MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF ECO-FRIENDLY GEOPOLYMER MATERIALS , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 1 No. 1 (2025)
- A. Sharma, NANOMATERIAL-ENHANCED GEOPOLYMERS FOR SUSTAINABLE CONSTRUCTION MATERIALS: MECHANICAL, DURABILITY, AND MICROSTRUCTURAL PERFORMANCE EVALUATION , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 1 No. 1 (2025)
- Umida A. Ziyamukhamedova, Dilnoza A. Egamnazarova, MECHANO-BIOLOGICAL RESPONSE OF POLYLACTIC ACID-BASED BIOCOMPOSITES IN THE CONTEXT OF STRUCTURAL MATERIAL DESIGN , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 1 (2026)
- Mamasidiqov Javlonbek, Dusmatov Rovshan Kamildjanovich, ENERGY-EFFICIENT OPERATING MODES OF ASYNCHRONOUS ELECTRIC MOTOR PUMPS WITH VARIABLE FREQUENCY CONTROL , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 1 (2026)
- Kulbasheva X. X., Mamatov Sh. Sh., Ulashova D. E., DIRECT CHLORINATION OF ETHYLENE FOR THE SYNTHESIS OF 1, 2-DICHLOROETHANE , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 2 (2026)
- Bekjonov Rozisher Soatmurodovich, Erdanov Behruz Sanjar ugli, Karimov Muslimbek Ilkhomjon ugli, Ravshanov Avazbek Akbar ugli, TECHNOLOGY OF OIL EXTRACTION WITH HYDRAULIC EQUIPMENT , Eureka Journal of Geoscience, Materials & Resource Engineering: Vol. 2 No. 2 (2026)
You may also start an advanced similarity search for this article.








